ACOR® monobloc

Hip - Femoral stems - Primary

Primary Anatomical Femoral Stems. The ACOR® stem is available in monoblock and modular versions. The monoblock version is available in Standard and Lateralised models. The modular versions ACOR® and cemented ACOR® include 4 modular necks.

Documentation
Important element
Product range
Documentation
​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

Grooves increase the bone-implant contact area; they are closed proximally and open distally
Proportionately scaled sizes
Impaction limit corresponds to HAP boundary
Material: Titanium
Coating: Uniform 80 µm thick HAP

 

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

Anatomic 8° metaphyseal curvature matches the proximal femur's natural curvature
Primary stability ensured by ovoid metaphyseal cross-section that optimises metaphyseal filling
Its length and diameter make it easy to implant through the anterior approach
Thin, cylindrical distal end contributes to metaphyseal anchoring and ensures diaphyseal guiding

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

 

 

Oval impaction hole on top of stem
Threaded hole used for extraction

 

 

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

Thin femoral neck with small taper (10/12, 5°42‘30’’)
Standard version: Neck-shaft angle 137°
Lateralised version: Neck-shaft angle 129°
The joint centre of the Standard stem corresponds to a modular ACOR® stem with A/R neck and regular anteversion/retroversion values
The joint centre of the Lateralised stem corresponds to a modular ACOR® stem with L+/M+ neck in the lateral position

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

 

Femoral stem product available in several versions:
    - Modular
    - Cemented or Cementless
    - Monoblock
    - Standard or Lateralised (cementless only)

 

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​

 ACOR® instrumentation can be used during conventional surgery or with Computer Assisted Surgery (AMPLVISION®):
    - Computer Assisted Surgery of the cup and femoral stem helps to maintain leg length and offset
Several broach handles suitable for the various hip approaches are available for use with or without AMPLIVISION®:
    - Posterior approach
    - Anterior approach with patient on their side
    - Anterior approach with patient supine
    - Anterior Hueter approach with patient supine

 



“Some devices may not be approved in your country, please contact your local distributor for further information”

 

View also

1ACOR®
Cementless

2LOGIC®
Cementless

Standard Femoral Stems:

Sizes 1 to 7, Right
Sizes 1 to 7, Left

 

Lateralised Femoral Stems:

Sizes 1 to 7, Right
Sizes 1 to 7, Left

 

 

Femoral Heads:

  • Stainless steel femoral head Ø22.2 mm — short (−2 mm), medium (0 mm), long (+2 mm) necks
  • Stainless steel femoral head Ø28 mm — short (−3.5 mm), medium (0 mm), long (+3.5 mm), extra-long (+7.5 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø28 mm — short (−3.5 mm) , medium (0 mm), long (+3.5 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø32 mm — short (−4 mm) , medium (0 mm), long (+4 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø36 mm — short (−4 mm) , medium (0 mm), long (+4 mm) necks


Revision femoral heads with sleeves available upon request.