Reconstruction OPTIMAL®

Hip - Femoral stems - Reconstruction

Anatomical cementless revision/reconstruction femoral stem
Stem with modular neck (4 modular, reversible necks) that can be locked distally
Neck modularity allows for accurate, flexible restoration of joint centre and better control over leg length.

In clinical use since 2010.

Documentation
Important element
Product range
Documentation

Revision femoral stem (200 mm long) and Reconstruction femoral stem (250 mm long)
Grooves increase the bone-implant contact area; they are closed proximally and open distally
4° metaphyseal anteversion and anterior curvature of femoral shaft
Impaction limit corresponds to HAP boundary
Metaphysis is proportionately scaled between sizes. Distal diameter is 12 or 14 mm, depending on stem size.

 

 

Smooth distal end: cone-shaped and highly polished
Two holes distally for Ø4.7 mm threaded pins

Partial HAP coating
Material: titanium

 

 

 

Elliptical, symmetrical cavity allows the modular neck to be reversed
Morse taper connection
Threaded hole at bottom of cavity for extraction tool
Impaction point at top of stem is offset to ensure impaction is in line with shaft axis

 

 

Locking threaded pin Ø 4.7 mm
Threaded area below head: Ø 6.5 mm cortical thread
Rounded screw head
Material: titanium

 

 

 

Femur stem option that fits within a product line spanning revision and reconstruction:
GENERIC® Revision: cemented straight femoral stem
INTEGRALE® Revision: cementless straight femoral stem
OPTIMAL: cementless dual curvature femoral stem

 

 

 

“Some devices may not be approved in your country, please contact your local distributor for further information”

 

View also

1EXTREME®
Cementless

Revision Femoral Stems - Length 200mm:

 

  • Size 1 (Ø12) to size 5 (Ø14)

Reconstruction Femoral Stems -  Length 250mm:

 

  • Size 1 (Ø12) to size 5 (Ø14)

 

Locking threaded pins : 

 

  • Ø4.7 Lg 30 to 45 mm (5mm increments)

 

 

Reversible modular necks

 

Lateral/Medial
Ante/Retro 8°
Lateral plus/Medial plus
Lateral/Medial +10.5

 

 

 

Femoral Heads

 

Stainless steel femoral head Ø22.2 mm — short (−2 mm), medium (0 mm), long (+2 mm) necks
Stainless steel femoral head Ø28 mm — short (−3.5 mm), medium (0 mm), long (+3.5 mm), extra-long (+7.5 mm) necks
BIOLOX® DELTA ceramic femoral head Ø28 mm — short (−3.5 mm), medium (0 mm), long (+3.5 mm) necks
BIOLOX® DELTA ceramic femoral head Ø32 mm — short (−4 mm), medium (0 mm), long (+4 mm) necks
BIOLOX® DELTA ceramic femoral head Ø36 mm — short (−4 mm), medium (0 mm), long (+4 mm) necks

  • Revision femoral heads with sleeves available upon request