INTEGRALE®

Hip - Femoral stems - Primary

Primary straight femoral stems
Full HAP coating
The INTEGRALE® stem is part of the primary straight femoral stems product line (INTEGRALE®, LOGIC® and GENERIC® stems) that differ only in their fixation method.
In clinical use since 1999.

Documentation
Important element
Product range
Documentation

Grooves increase the bone–implant contact area; they are closed proximally and open distally
Proportionately scaled sizes
Impaction limit corresponds to HAP boundary
Material: titanium
Coating: Uniform 80 µm thick HAP layer

 

 

 

Primary stability ensured by ovoid metaphyseal cross-section that optimises metaphyseal filling
Neck–shaft angle: 137°

 

 

 

 

Oval impaction hole on top of stem
Threaded hole used for extraction

 

 

 

 

Thin, coated distal end

 

 

 

Femur stem option within a product line based on the same concept:
GENERIC®: cemented femoral stem
LOGIC®: partially coated, straight femoral stem
INTEGRALE®: fully coated, straight femoral stem
INTEGRALE® Modular: fully coated, straight femoral stem with modular necks

 

 

INTEGRALE®, LOGIC® and GENERIC® stems share the same instrumentation sets, which can be used either during conventional surgery or with Computer Assisted Surgery (AMPLIVISION®):
- Computer Assisted Surgery of the cup and femoral stem helps to maintain leg length and offset
Several rasp handles suitable for the various hip approaches are available for use with or without AMPLIVISION®:
- Posterior approach
- Anterior approach with patient on their side
- Anterior approach with patient supine
- Anterior Hueter approach with patient supine

 

 

 

“Some devices may not be approved in your country, please contact your local distributor for further information”

 

View also

1INTEGRALE® modular
Cementless

2GENERIC®
Cemented

Femoral stems:

 

  • Size 1 to 7 (Size 8 is optional)

 

 

 

 

 

Femoral Heads:

 

  • Stainless steel femoral head Ø22.2 mm – short (−2 mm), medium (0 mm), long (+2 mm) necks
  • Stainless steel femoral head Ø28 mm – short (−3.5 mm), medium (0 mm), long (+3.5 mm), extra-long (+7.5 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø28 mm – short (−3.5 mm), medium (0 mm), long (+3.5 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø32 mm – short (−4 mm), medium (0 mm), long (+4 mm) necks
  • BIOLOX® DELTA ceramic femoral head Ø36 mm – short (−4 mm), medium (0 mm), long (+4 mm) necks

    Revision femoral heads with sleeves available upon request; more information can be found here